When we say “built to last,” we mean just that. Every part of our elevators, inside and out, is built to last. Your home is your safe place. You shouldn’t have to worry about your elevator. That’s why at UNA, we care about the parts you see as well as the parts you don’t see.
We use strong materials and add extra safety features. That way, our elevators are built to last. Experts say a good elevator has a low failure rate and saves you money. Our elevators don’t focus on the outside décor but on the inside quality. They’re rugged and built to last.
Every UNA elevator meets high standards. Even after 10 years, it will still work well and look great in your home.
Low-speed drive
Here’s what sets our UNA Series elevators miles ahead of the competition: we’ve cracked the code to long-lasting performance right at the system’s core. While others chase speed, we’ve engineered a low-speed.
This isn’t your average elevator setup. Running our motor at a lower RPM isn’t just a technical tweak—it’s a masterstroke. By reducing the stress on gears, bearings, and pulleys, we’ve eliminated the wear and tear that plagues standard models. The result? A ride so smooth and quiet, you’ll barely know it’s moving. No more ear-piercing whines or jolting stops—just a whisper-soft glide between floors.
But the benefits don’t stop there. Slower operation means less heat, less friction, and components that stay cool under pressure. In the long run, that translates to significantly less maintenance and far fewer service calls. It’s not just about a better ride today; it’s about an elevator that will keep performing flawlessly for years to come.
Other manufacturers may brag about speed, but we know that real quality lies in durability. Our drive system isn’t just innovative—it’s proven.
Hard-chrome plating
Most elevator companies cut corners on protecting moving parts. Not us. We coat our drive shafts, guide rollers, and wheels with industrial – grade hard chrome plating. This isn’t just any coating—it’s a tough shield that fights off scratches, wear, and rust.
While cheaper elevators use thin paint or no protection at all, our parts stay smooth and aligned. No more worrying about grooved pulleys or rusty shafts. That means fewer breakdowns, lower repair bills, and less hassle at home.
We’ve tested this in real homes, and the results are clear: hard chrome plating cuts downtime and saves money. When you choose a UNA elevator, you’re choosing quality that lasts from day one.
Reinforced traction system
Other companies might skimp on the traction system, but we don’t. In our elevators, the belt and drive wheel that lift the car are top – notch. We use a super – strong steel belt coated with TPU and a bigger drive sheave.
The TPU coating grabs the sheave tightly and barely stretches. The larger sheave means the belt bends more gently. Together, they cut down on cable wear big time. Every time the elevator runs, our belt takes way less stress. Our belts outlast regular ones by years.
With our elevator you rarely need to replace parts. It rides smoothly even when it’s carrying a lot. Cheaper elevators have cords that fray or need constant adjusting. But our elevator cab moves up and down quietly and steadily. That’s what makes it a high – quality lift.
Automotive-grade e-coating
Most elevator makers use basic finishes, but we do things differently. We protect the UNA Series metal frame and panels with a finish as good as a luxury car’s. Every steel part gets a full cathodic electrophoretic (e-coat) paint – the same process car manufacturers use for bodies.
This e-coat gives us a perfect, hole-free coating on every surface, even hard-to-reach edges and welds. Why does that matter? It means our elevators resist rust and chemicals like nothing else. The e-coating wraps tightly around the metal, keeping moisture and harmful substances away.
With this automotive-grade finish, your elevator stays strong and looks great for years. No more rust on the frame or marks on the sheave – common issues with cheap paint jobs. The e-coat process is flawless, with no drips or thin spots. That means no rusty panels, no flaking, and no unexpected repair bills. The sleek finish makes your machine room look sharp, but most importantly, it keeps rust out. So you’ll have fewer maintenance problems and a more reliable elevator.
Good value for money
We know the price of the UNA Series might seem high at first glance. But this isn’t just an expense—it’s an investment. Every feature we’ve built into our elevators cuts down on service calls, repairs, and extends their lifespan. As experts say, a well-made home elevator saves you money over time, and that’s exactly what the UNA Series does.
That peace of mind is exactly what we promise. From the day we install your UNA elevator, you can trust it to work safely and smoothly. We’re not just selling an elevator; we’re giving you a lifetime of reliable service. When you think about the money you’ll save on repairs, the higher price quickly pays for itself.
